Zoraintech

Bill Bell Bill Bell

0 Course Enrolled • 0 Course Completed

Biography

인기자격증Fire-Inspector-II시험대비덤프공부시험최신버전덤프자료

다른 사이트에서도International Code Council Fire-Inspector-II인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 Pass4Test의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론Pass4Test을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한Pass4Test를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.

우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 Pass4Test사이트에서 제공되는International Code Council인증Fire-Inspector-II시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

>> Fire-Inspector-II시험대비 덤프공부 <<

Fire-Inspector-II최신버전 시험대비자료 - Fire-Inspector-II시험대비 인증공부

Pass4Test International Code Council Fire-Inspector-II덤프 구매전 혹은 구매후 의문나는 점이 있으시면 한국어로 온라인서비스 혹은 메일로 상담 받으실수 있습니다. 기술 질문들에 관련된 문제들을 해결 하기 위하여 최선을 다 할것입니다. 고객님이 Pass4Test International Code Council Fire-Inspector-II덤프와 서비스에 만족 할 수 있도록 저희는 계속 개발해 나갈 것입니다.

최신 Fire Inspector Fire-Inspector-II 무료샘플문제 (Q15-Q20):

질문 # 15
Given: A nonsprinklered building constructed with protected noncombustible material has a fire-resistive rating of a minimum of 1 hour. What is the most protective type of construction, from the choices below, that meets these parameters?

A. IIA
B. IIB
C. IIIB
D. VA

정답：A

설명：
Understanding Construction Types
The International Building Code (IBC) Chapter 6 classifies building construction types based on material combustibility and fire resistance.
Type II construction is noncombustible, meaning it is built using materials such as steel or concrete that do not contribute fuel to a fire.
The difference between Type IIA and Type IIB is the level of fire resistance.
2. Fire Resistance Rating Requirement
Type IIA construction requires a minimum 1-hour fire-resistive rating for structural elements, meeting the conditions in the question.
Type IIB, on the other hand, has no minimum fire-resistive rating for structural components, making it less protective than Type IIA.
3. Verification of Other Options
Option B (IIB) - Incorrect, as Type IIB has no fire-resistive rating for its structural elements and does not meet the 1-hour requirement.
Option C (IIIB) - Incorrect, as Type III allows combustible exterior materials and is not entirely noncombustible.
Option D (VA) - Incorrect, as Type V construction is wood-framed and does not meet the requirement for noncombustible materials.
Reference Sources:
International Building Code (IBC) 2021 - Chapter 6 (Types of Construction) NFPA 220: Standard on Types of Building Construction ICC Fire Inspector II Study Guide (2021)

질문 # 16
Given: In automobile refinishing spray booths where drying by heat is done in the spray booth, the spray booth shall be equipped with interlocks between the spraying and drying apparatus and the ventilating system.
These interlocks shall be arranged to purge the spray vapors from the spray booth for a minimum period of __ minutes before the drying apparatus can be operated.

A. 0
B. 1
C. 2
D. 3

정답：B

설명：
In automobile refinishing spray booths where drying by heat occurs inside the same spray booth, fire codes require interlocks to prevent ignition hazards.
Before activating the drying apparatus, the ventilation system must purge the booth of spray vapors for at least
5 minutes to remove flammable concentrations.
Reference to Fire Inspector Documentation:
1. 2021 International Fire Code (IFC) - Section 2404.7.3 (Drying Operations in Spray Booths) IFC 2404.7.3 mandates that spray booths must have interlocks to purge vapors for a minimum of 5 minutes before activating the drying process.
This ensures that flammable vapors are removed before heat sources operate, reducing fire risks.
2. NFPA 33 - Standard for Spray Application Using Flammable or Combustible Materials (2021 Edition) - Section 15.4.6 NFPA 33, Section 15.4.6 confirms the requirement for a 5-minute ventilation purge cycle before heat drying.
Detailed Explanation of Answer Choices:
Option A (Incorrect): 2 minutes is insufficient for adequate vapor removal.
Option B (Incorrect): 3 minutes does not meet the minimum safety requirement.
Option C (Incorrect): 4 minutes is slightly below the code-mandated requirement.
Option D (Correct): 5 minutes is the minimum required purge time per IFC 2404.7.3 and NFPA 33.
Thus, the correct and verified answer is: D. 5.

질문 # 17
A container in a clean-agent extinguishing system must be refilled or replaced when it shows a loss in original weight of more than five percent, or a loss in original pressure of more than ___ percent.

A. 0
B. 1
C. 2
D. 3

정답：D

설명：
A container in a clean-agent extinguishing system must be refilled or replaced if it experiences a loss of more than 5% of its original weight or a loss in original pressure of more than 3%. This requirement ensures the system maintains sufficient agent concentration for fire suppression.
Reference to Fire Inspector Documentation:
1. NFPA 2001 - Standard on Clean Agent Fire Extinguishing Systems (2022 Edition) NFPA 2001, Section 7.3.2.1 states that a container must be refilled or replaced if the weight loss exceeds 5% or the pressure loss exceeds 3% from the original fill pressure.
These limits are set to maintain system effectiveness and ensure that a clean-agent system can properly discharge in case of a fire.
2. 2021 International Fire Code (IFC) - Chapter 9 (Fire Protection Systems) IFC 904.10 requires that clean-agent systems be maintained per NFPA 2001 to ensure reliability.
Detailed Explanation of Answer Choices:
Option A (Correct): 3% pressure loss is the correct threshold beyond which a container must be replaced or refilled.
Option B (Incorrect): While 5% is correct for weight loss, it is not the correct value for pressure loss.
Option C (Incorrect): A 10% pressure loss is too high and would compromise system performance before reaching the replacement threshold.
Option D (Incorrect): 12% is well beyond the acceptable loss limit and would pose a significant safety risk.
Thus, the correct and verified answer is: A. 3

질문 # 18
Atmospheric tanks with hazardous materials shall be equipped with a liquid-level limit control if they have a capacity which is greater than __ gallons.

A. 0
B. 1
C. 2
D. 3

정답：C

설명：
Reference to Liquid-Level Limit Control Requirements for Atmospheric Tanks:
According to The International Fire Code (IFC 2021), Section 5704.2.7.5, atmospheric tanks containing hazardous materials must be equipped with a liquid-level limit control if their capacity exceeds 500 gallons.
This requirement ensures that overfilling is prevented, reducing the risk of hazardous spills, leaks, and fire hazards.
Purpose of Liquid-Level Limit Controls:
These controls automatically shut off or alert operators when the liquid level reaches a predetermined limit.
They prevent tank overfill and reduce the risk of hazardous material release, which can cause fires, explosions, or environmental contamination.
Clarification of Incorrect Answer Choices:
A: 55 gallons # Incorrect
55-gallon drums are not subject to the same overfill protection requirements as large atmospheric tanks.
B: 100 gallons # Incorrect
Too low based on IFC 5704.2.7.5, which sets the requirement at 500 gallons.
C: 250 gallons # Incorrect
Some local regulations may require monitoring for tanks of this size, but IFC specifies 500 gallons as the mandatory threshold.
Conclusion:
The correct and verified answer is D (500 gallons) based on IFC 5704.2.7.5, ensuring proper overfill protection for atmospheric tanks containing hazardous materials.

질문 # 19
The maximum combined quantity of Class II and III liquids which may be stored in a flammable liquids storage cabinet is __ gallons.

A. 0
B. 1
C. 2
D. 3

정답：C

설명：
Reference to Flammable Liquids Storage Cabinet Requirements:
According to The International Fire Code (IFC 2021), Section 5704.3.2 and NFPA 30 (Flammable and Combustible Liquids Code), Section 9.5.3, the maximum amount of Class II and Class III liquids that can be stored in a flammable liquids storage cabinet is 120 gallons.
This limit ensures safe containment, fire protection, and reduced risk of liquid ignition or spillage.
Understanding Class II and III Liquids:
Class II liquids: Flash point between 100°F and 140°F (e.g., diesel fuel, kerosene).
Class III liquids: Flash point above 140°F (e.g., motor oil, cooking oils).
While these liquids are less volatile than Class I liquids, they still pose a fire risk, requiring proper storage in approved cabinets.
Clarification of Incorrect Answer Choices:
A: 10 gallons # Incorrect
Too low; IFC and NFPA allow up to 120 gallons in storage cabinets.
B: 60 gallons # Incorrect
This is the maximum for Class I liquids, but Class II and III liquids are allowed up to 120 gallons.
D: 240 gallons # Incorrect
Exceeds the allowable limit per IFC 5704.3.2 and NFPA 30, which set the maximum at 120 gallons per cabinet.
Conclusion:
The correct and verified answer is C (120 gallons) as per IFC 5704.3.2 and NFPA 30, ensuring compliance with flammable liquids storage safety standards.

질문 # 20
......

우리Pass4Test에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리Pass4Test는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리Pass4Test 사이트에서 제공하는International Code Council Fire-Inspector-II관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

Fire-Inspector-II최신버전 시험대비자료: https://www.pass4test.net/Fire-Inspector-II.html

67 - Fire Inspector II Exam덤프는 실제시험문제의 모든 시험문제유형을 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 Fire-Inspector-II : 67 - Fire Inspector II Exam시험에 도전할수 있습니다, Pass4Test International Code Council Fire-Inspector-II덤프의 질문들과 답변들은 100%의 지식 요점과 적어도 98%의 시험 문제들을 커버하는,수년동안 가장 최근의International Code Council Fire-Inspector-II시험 요점들을 컨설팅 해 온 시니어 프로 IT 전문가들의 그룹에 의해 구축 됩니다, International Code Council Fire-Inspector-II시험대비 덤프공부 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요, Pass4Test의International Code Council Fire-Inspector-II덤프는 모두 영어버전으로 되어있어International Code Council Fire-Inspector-II시험의 가장 최근 기출문제를 분석하여 정답까지 작성해두었기에 문제와 답만 외우시면 시험합격가능합니다.

그 말에 미라벨이 의아하다는 표정을 감추지 않은 채 입을 열었다, 그것을 익히 알고 있던 태무극의 말에 선선히 고개를 끄덕인 무진, 67 - Fire Inspector II Exam덤프는 실제시험문제의 모든 시험문제유형을 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 Fire-Inspector-II : 67 - Fire Inspector II Exam시험에 도전할수 있습니다.

시험패스에 유효한 Fire-Inspector-II시험대비 덤프공부 최신버전 자료

Pass4Test International Code Council Fire-Inspector-II덤프의 질문들과 답변들은 100%의 지식 요점과 적어도 98%의 시험 문제들을 커버하는,수년동안 가장 최근의International Code Council Fire-Inspector-II시험 요점들을 컨설팅 해 온 시니어 프로 IT 전문가들의 그룹에 의해 구축 됩니다.

편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요, Pass4Test의International Code Council Fire-Inspector-II덤프는 모두 영어버전으로 되어있어International Code Council Fire-Inspector-II시험의 가장 최근 기출문제를 분석하여 정답까지 작성해두었기에 문제와 답만 외우시면 시험합격가능합니다.

Fire-Inspector-II덤프를 구매페이지의 구매절차대로 결제하시면 시스템 자동으로 덤프가 고객님 구매시 등록한 메일주소로 발송됩니다.

Bill Bell Bill Bell

Biography

Shopping cart